UCR 2008 Setup


The parameters that support UCR 2008 reside in Cisco Unified Communications Manager Administration.

 

The following table describes the parameters and indicates the procedure to change the setting.


Parameter

Administration Path

Procedure


FIPS Mode

 

Device > Device Settings > Common Phone Profile


Set Up UCR 2008 in Common Phone Profile Configuration Window


System
> Enterprise Phone Configuration


Set Up UCR 2008 in Enterprise Phone Configuration Window


SSH Access


Device
> Phone


Set Up UCR 2008 in Phone Configuration Window


Device
> Device Settings > Common Phone Profile


Set Up UCR 2008 in Common Phone Profile Configuration Window


Web Access

 

Device > Phone


Set Up UCR 2008 in Phone Configuration Window

Control Web Page Access


HTTPS Server


Device
> Phone


Set Up UCR 2008 in Phone Configuration Window


System
> Enterprise Phone Configuration


Set Up UCR 2008 in Enterprise Phone Configuration Window


80-bit SRTCP


Device
> Device Settings > Common Phone Profile


Set Up UCR 2008 in Common Phone Profile Configuration Window

 

System > Enterprise Phone Configuration

 

Set Up UCR 2008 in Enterprise Phone Configuration Window

 


IP Addressing Mode

 

Device > Device Settings > Common Device Configuration

 

Set Up UCR 2008 in Enterprise Phone Configuration Window

 

Network Configuration Menu

 


IP Addressing Mode Preference for Signaling


Device
> Device Settings > Common Device Configuration


Set Up UCR 2008 in Common Phone Profile Configuration Window

 

Network Configuration Menu