Product-Specific Parameters

Cisco Unified Communications Manager Administration allows you to set some product specific configuration parameters for Cisco Unified IP Phones. The following table lists the configuration windows and path in Cisco Unified Communications Manager Administration.

Configuration window


Enterprise Phone Configuration window

System > Enterprise Phone Configuration

Common Phone Profile window

Device > Device Settings > Common Phone Profile

Phone Configuration window

Device > Phone; Product Specific Configuration area of window


You can set the following parameters in any of the three configuration windows:

  • Settings Access
  • Video Capabilities
  • Web Access
  • Load Server
  • RTCP
  • Peer Firmware Sharing
  • Cisco Discovery Protocol (CDP): Switch Port
  • Cisco Discovery Protocol (CDP): PC Port
  • Link Layer Discovery Protocol - Media Endpoint Discover (LLDP-MED): Switch Port
  • Link Layer Discovery Protocol (LLDP): PC Port
  • IPv6 Load Server
  • 802.1x Authentication
  • Switch Port Remote Configuration
  • PC Port Remote Configuration
  • Automatic Port Synchronization
  • SSH Access

When you set the parameters, select the Override Common Settings check box for each setting you wish to update. If you do not check this box, the corresponding parameter setting does not take effect. If you set the parameters at the three configuration windows, the setting takes precedence in the following order:

  • Phone Configuration window (highest precedence)
  • Common Phone Profile Configuration window
  • Enterprise Phone Configuration window (lowest precedence)